| Nom De Marque: | AIKE POWER |
| Numéro De Modèle: | AC-80 |
| Nombre De Pièces: | 1 |
| Prix: | negotiate |
| Conditions De Paiement: | LC, T/T |
| Capacité à Fournir: | 1000 set / m |
AikePower AC-80 is a medium-duty industrial diesel generator powered by DCEC 4BTA3.9-G11 engine, designed for continuous prime power and emergency standby power supply. It delivers 72.5kVA (58kW) prime power and 80kVA (64kW) standby power at 50Hz 1500RPM, widely used for commercial buildings, factories, construction sites, remote off-grid areas and Philippine power station backup projects.
Water jacket preheater, water separator, oil preheater, external battery charger
Anti-condensation heater, permanent magnet generator, winding temperature sensor
Daily integrated fuel tank, external large fuel tank, auto fuel filling system, fuel level sensor monitor
Standard rainproof canopy, low-noise rental silent container, mobile transport chassis
DSE6020 basic AMF panel, DSE7320 advanced auto mains failure controller, DSE8610 multi-unit parallel synchronizing panel, ATS auto transfer switch, ABB circuit breaker
380/220V, 415/240V, 440/254V for global market matching
| Item | Specification |
|---|---|
| Frequency | 50Hz |
| Rated Speed | 1500RPM |
| Prime Power | 72.5KVA / 58KW |
| Standby Power | 80KVA / 64KW |
| Rated Voltage | 400/230V (3P4W Y connection) |
| Phase | 3 Phase |
| Power Factor | 0.8 lagging |
| 100% Load Fuel Consumption | 17.6L/Hr |
| 75% Load Fuel Consumption | 13.2L/Hr |
| 50% Load Fuel Consumption | 9.1L/Hr |
| Max Working Altitude | ≤1500m |
| Max Ambient Temperature | ≤50℃ |
| Engine Parameter | Data |
|---|---|
| Manufacturer & Model | DCEC 4BTA3.9-G11, 4-stroke inline 4 cylinder |
| Air Intake | Turbocharged, water-air cooling |
| Fuel Control | BYC mechanical pump / electronic governor optional |
| Displacement | 3.9L |
| Bore * Stroke | 102mm * 120mm |
| Compression Ratio | 17.3:1 |
| Rated Rotation Speed | 1500rpm |
| Max Standby Engine Power | 80KW |
| Governor | Electronic governor standard |
| Intake Air Flow | 70L/sec |
| Exhaust Gas Flow | 134L/sec |
| Exhaust Temperature | 548°C |
| Max Exhaust Back Pressure | 10kPa |
| Max Intake Restriction | 6.2kPa |
| Total Engine Oil Capacity | 10.9L |
| Oil Consumption Rate | <4g/kWh |
| Engine Coolant Volume | 8.3L |
| Thermostat Working Range | 83℃–95℃ |
| Max Allowable Water Temp | 104°C |
| Alternator Item | Technical Data |
|---|---|
| Brand & Model | Stamford UCI 224F1 |
| Phase & Wiring | 3 Phase, 4 Wire Y-type |
| Bearing Structure | Single bearing |
| Protection Class | IP23 |
| Excitation Mode | Brushless self-exciting |
| Insulation / Temperature Rise | Class H / H |
| TIF / THF | <50 / <2% |
| Steady State Voltage Regulation | ≤±1% |
| Rated Capacity | 72.5KVA |
| Efficiency | 89.9% |
| Cooling Air Flow | 0.216m³/s |
| Size & Weight | Open Frame Genset | Soundproof Canopy Genset |
|---|---|---|
| Length (L) | 1855mm | 2500mm |
| Width (W) | 900mm | 1070mm |
| Height (H) | 1650mm | 1800mm |
| Total Gross Weight | 1190kg | 1500kg |
Standard equipped for single generator automatic mains failure operation:
Built-in USB, RS232, RS485 communication ports, remote PC monitoring, real-time mains supply detection, extended fault event recording, reduce engine wear via intelligent load control.
Support synchronous operation of up to 32 generator units, automatic load sharing, centralized fault alarm with LCD, LED indicator and audible buzzer, stores 250 historical event logs for maintenance traceability.
Every AikePower AC-80 genset undergoes strict full factory testing before delivery. Our standard warranty takes effect based on the earliest of three conditions:
Global spare parts supply & local after-sales service supported by AikePower overseas distributors. Specifications subject to change without prior notice for technical optimization.
If you need silent canopy, mobile trailer, parallel system, ATS switch or special voltage configuration for your Philippine power project, send your detailed demand to our sales manager. We provide one-stop customized generator solution, factory direct price, fast delivery and global after-sales support.
Our professional engineer team will reply within 24 hours for Southeast Asia power projects.
Contact Us Now